5 Nema 17 Japan Servo Stepper Motors GT2 Belt Pulleys Bearings Couplers Kit

5 Nema 17 Japan Servo Stepper Motors GT2 Belt Pulleys Bearings Couplers Kit
5 Nema 17 Japan Servo Stepper Motors GT2 Belt Pulleys Bearings Couplers Kit 5 Nema 17 Japan Servo Stepper Motors GT2 Belt Pulleys Bearings Couplers Kit
Brand: Japan Servo
Product Code: JS KH42JM2B182A KIT
Availability: In Stock
Price: $109.00
Qty:     - OR -   Add to Wish List
Add to Compare

3D Printer Kit comes with 5 Stepper Motors, 12 x 8mm Linear Bearings, 2 x Aluminum Flexible Shaft Couplers (Z Axis), 2 x GT2 Timing Pulleys, 1 x Filament Gear, 2 meters of GT2 Timing Belt. 

Stepper Motors:

Made by Japan Servo. Will work with power supply 12-36VDC.
Rated Current: 0.9A
Rated Voltage: 2.52V
Resistance: 5.0 Ohms/Phase
Frame Size Nema 17 / 1.8 Degree Step
Motor Torque: 51.2oz/in 362mNm Bi-Polar (Generic Stepper Driver, 24VDC 1.0A, Half Step, Equipment: IMADA HTG2 Digital Torque Gauge)
Comes with 6-Wire. Wire Length 3" - 4"
Wiring: | A- | A Common | A+ | B+ |  B Common | B- |
*Wire Color May Vary. Please contact me if you need assistance with wiring.
How to find wires here: reprap.org/wiki/Stepper_wiring
Overall Dimensions 42mm x42mm x 43.5mm (with Anti Vibration Mount)
2 X Ball Bearings
Shaft: 5mm
Shaft length 19mm

Couplers:

2 X New Precision Aluminum Flexible Shaft Couplers. Perfect fit from 5mm stepper motor shaft to ballscrew, shaft or threaded rod 5/16" or 8mm. 

Linear Bearings:

12 Precision Linear Bearings. Internal Diameter is 8.00mm. These bearings can also be used with 5/16" (7.94mm) stainless steel shafts.
Overall Dimensions: 8.00mm x 15.00mm x 24.00mm

Timing Pulleys:

Aluminum GT2 Pulleys for GT2 Timing Belt up to 6mm. Come with hex screws and tool

Pitch: 2mm (GT2)
Number of tooth: 20
Outside Diameter: 15.00mm
Length: 14.00mm
Bore: 5.00mm

Timing Belt:

Highest quality precision timing belt, not cheap Chinese replacement. Made from NEOPRENE - Synthetic Rubber reinforced with fiberglass cords for superior strength. Neoprene - oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930. Balanced combination of polymer's properties:

  • Resists degradation from sun, ozone and weather
  • Performs well in contact with oils and many chemicals
  • Remains useful over a wide temperature range
  • Displays outstanding physical toughness
  • Resists burning inherently better than exclusively hydrocarbon rubbers
  • Outstanding resistance to damage caused by flexing and twisting

Specifications:

  • Belt Material: Neoprene (Synthetic Rubber)
  • Belt Type: GT2 / P2M
  • Pitch (mm): 2
  • Belt Width (mm): 6
  • Core Wire Material: Glass Fiber
  • Circumference Length (mm): Open Loop
  • Number of Teeth: N/A
  • Belt Shape: Open End
  • Belt Tooth Surface: Standard (Single Sided)
  • Belt Shape Type: Round Tooth Profile High Torque

Filament Pulley:

Bronze filament pulley for 3d Printer. Fits Nema 17 Stepper Motor with 5mm shaft. 2 grub screws. Very sharp teeth.
This drive gear works with both 1.75mm and 3mm ABS and PLA filaments.

 

 

Specifications
Manufacture Japan Servo
Model KH42JM2B194A
Coil Type Uni-Polar
Frame Size Nema 17 1.7" / 42MM
Motor Length 35.50MM
Type of Laminated Stator 2-Phase Hybrid
Supply Voltage 12-36VDC
Steps per Revolution 200
Step Degree 1.8
Shaft Type Single
Shaft Length 19.00MM
Shaft Diameter 5.0MM
Resistance 5.0 Ohms / Phase
Rated Voltage 2.52V
Rated Current 0.9A
Motor Torque (Test Conditions) 51.2oz/in 362mNm (Drive Sequence: Bi-Polar, Driver: Chopper Dual, Supply Voltage: 24V, Drive Current 1.0A/WDG, Step Mode: Half Step)
Condition Reconditioned to original manufacturer's specification

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: